Ide Expansion B&w G3, Can I add an additional ATA-100 HD Options

[Jerald]

I have a B&W G3 300Mhz w/ the original IDE 6GB HD, that is being sent to me. I also have an extra 40GB HD that's ATA-100 7200rpm, that I would like to install onto this system, once the computer arrives.

Can I just add the extra hard drive? Or do I need an additional IDE Controller card? If so, which is the right card?

I have a PCI serial port card (for hooking up a MOTU MIDI Timepiece AV serial), an Adaptec 2904 SCSI (for hooking up an old CD-RW), plus the Digidesign 001 PCI card. I don't think I have another PCI slot for an IDE controller card.

I really appreciate any help you can provide. Thank you in advance.

[lepetitmartien]

You can have up to 3 drives in the BW 2 at most in IDE.

The ideal would have been to have a PCI IDE card for it (no stress on the processor) but as PCI at Apple are a SPARSE furniture (WE WANT MORE!)…

So you have ti hook it on the empty slot of the IDE bus. Just think of put the jumpers on the drive to the slave position (it's either described on it, else browse on the manufacturer site, you'll find it in the technical support)

The mac could be a bit temperamental on start up (it happens when you add drives or cards), just restart it should be all right.