440 Forums > English > Mac Music > Audio, MIDI, DSP Cards and Interfaces, Controllers > Other Controllers, Interfaces, DSP Cards Alesis Multimix 8 Fw, Working with a Alesis Multimix 8 FW and macbook 2.4(white) |
 mer. 17 déc. 2008, 19:19
Message
#1
|
|
 Newbie Groupe : Members Messages : 20 Inscrit : 03 févr. 03 Lieu : Lisbon - PT Membre no 11,396  |
Hello,
I've been working with a M-Audio FW410 for the past 4 years, with no problems, live and studio, using max/msp, logic pro, peak and protools m-powerd on 2 computers: an old powerbook G4/867 and a slight newer Imac G5/1.8. The FW410 is ok, nothing to write home about, but it works in every condition, be it recording from phantom powerd mics live, or tracking 8 to 16 track music studio project or video soundtrack... I bought one of the last (at least here, where I live, in Lisbon, Portugal) surviving 2.4 white macbooks with FIREWIRE!!!. Going from a G4 Titanium, is quite a leap, he's really fast with just 2GB of ram, that shares with the graphic board, running 10.5.6... I'm seeking advise or experiences on the Alesis Multimix 8 FW mixer, it's a small analog mixer with a multichannel firewire interface built-in and is incredibly cheap. I keep on reading on the web, lots of problems with this mixer on the PC side, usually driver related, or the lack of 6 pin FW connections on PC's laptops... but almost none on the mac side. Does it work ok, for multitracking? Bus powered? are the pre's clean enough? i know they are not prestine... I know there are much better mixers/FW interfaces, Mackie, M-Audio, but they cost much more and are big to carry around on a bagpack, besides it can act as a small analog mixer for laptop work in the field where is going to work most of the time... Please some help is needed, Thank you for your patience, CS Ce message a été modifié par kactus - mer. 17 déc. 2008, 19:29. |
 |
 
|
 |
Réponse(s)
|
ven. 19 déc. 2008, 09:03
Message
#2
|
|
 Newbie Groupe : Members Messages : 16 Inscrit : 09 mai 04 Lieu : Nashville - US Membre no 42,836 |
I have the io14 Firewire interface.
The first one quit reading Firewire about a week after installation. It took me almost a month to convince the folks at Alesis that I should send it back to them. The replacement worked for a while, but now it doesn't pass audio. It sees Firewire, and the Mac and Cubase see it, but no output gets to the interface. I can't get any straight answers out of anybody. I can't prove the unit is defective, but I should have learned after my ADAT blew it's marginal power supply. NEVER BUY ALESIS! -------------------- NO, you can't have any more monitor! 130dB is quite enough!
|
|
|
|
Les messages de ce sujet
kactus Alesis Multimix 8 Fw mer. 17 déc. 2008, 19:19
rynn I had a soundcard, usb, Alesis IO2.
On Thomann the... jeu. 18 déc. 2008, 07:33 emgcarra Hi Kaktus:
I ´ve been working with a very similar... jeu. 18 déc. 2008, 15:36
houstonmusic [Cheap always turn to expensive in the worst momen... jeu. 18 déc. 2008, 19:00 kactus Hello all,
Thank you very much for your opinions ... ven. 19 déc. 2008, 13:13 mortalengines I really liked my Onyx. I wound up selling it aft... sam. 20 déc. 2008, 06:54 emgcarra All is true....
I have heard about the M-Audio Pr... lun. 22 déc. 2008, 19:14 emgcarra Now I don´t know what to think ...I´ve been readin... jeu. 22 janv. 2009, 16:25 kactus Hi all,
Back on the same subject (after a few mot... mer. 2 sept. 2009, 16:46 |
1 utilisateur(s) sur ce sujet (1 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :
