J'ai Tout Essayé, PRO TOOLS 6.8.1 Options

[phokn-t]

Alors mon probleme persiste je ne comprends vraiment pas ce qui cloche!!!!

Y a t il un ongé son dans le coin s il vous plait? Qui connaisse l'environnement MAC PRO TOOLS!

[groovebrother]

9035

This is fixed in Pro Tools 6.1 so the solutions is to upgrade to 6.1
You can either download this update to Pro Tools 6.0 or 6.0.1 from our web site or you can get an updater CD from a Digidesign Dealer
Use the "Limit Open Ended Record" preference in Setup > Preferences > Operation. Limiting this preference to 20 minutes or less significantly improves Pro Tools performance, even when recording onto large volumes.

This error can occur when the hard drive being used for audio is near capacity.
Backup and reinitialize the drive, free up some space and defragment the drive, or use another hard drive instead.
You may be able to obtain temporary relief by going to Setup>Preferences>Operation and limiting the open-ended record allocation preference to 30 minutes or less.

You will encounter a -9035 error when opening Pro Tools sessions or media files residing on an HFS formatted hard drive, if the file names contain "international characters"(any characters in the Extended ASCII set). You should transfer any Pro Tools files from the HFS volume by opening them in Pro Tools 6.0, and then using Save Session Copy In... to save a copy to an HFS+ formatted hard drive. Files can also be copied from an HFS volume to an HFS+ volume in the Finder. However, in order to use these files in Pro Tools 6.0, you must first remove the original HFS files from your system, either by deleting the files from the HFS volume, or by unmounting the HFS volume.

DAE error -9035 when trying to playback or record audio. This can happen if importing audio files or renaming audio files. This can also happen after creating fade files or performing Edit smoothing in Beat Detective on Pro Tools 6.0.
This is a design limitation.
This error message will appear if a Pro Tools session has more than 31 characters for the name in the American OS (or more than 15 characters in the Japanese OS).
Also could be caused by using illegal characters ^ ! < > / ( ) - ;
or international characters from other languages (any characters in the Extended ASCII set. example é à).
Workaround:
Rename the session with 31 or less characters in American Mac Operating system.
Rename the session with 15 or less Japanese characters in Japanese Mac Operating System.

None of the other solutions for the DAE Error -9035 are working for me. What else might I try?

The -9035 error can occur for many reasons on Mac OS X and WinXP (see Answerbase articles 26115, 26300, 26662, 27679). Here are some of the more unusual causes and workarounds:

- Unsupported SCSI card; check compatibility information.
- Audio files were manually removed (outside of Pro Tools) while the session was still open.
- Bouncing to multichannel format. Try bouncing to a file format other than multi-mono. This will force Pro Tools to convert after bounce. Also try choosing a destination other than your session audio files folder.
- The Mixer is passing data regardless of whether there is audio on the track or not, so the more tracks you have open the busier the PCI bus. The way to stop this is to mute tracks when they are not needed and turn on "Mute frees voices".
- This was seen with Pro Tools LE 6.1 sessions that were created on ATA drives, backed up to Avid LANshare, and restored back to ATA drives. At the time of this writing, Pro Tools does not support LANshare.
- Corrupt fades can cause this. Trashing the fade files (and thus forcing Pro Tools to recalculate them) may resolve the issue.
- In one case disabling FileVault resolved the problem.

heuu ya pas un modéro qui pourrait corriger l'énorme faute du titre : ça tue les yeux à chaque fois

Ce message a été modifié par groovebrother - dim. 29 juil. 2007, 03:38.

[phokn-t]

Ouais j ai trouver aussi sur digidesign après donc c est cool d avoir tout copier là pour ceux qui passeront
suite à cetter erreur