 Audio And Midi Interfaces-getting Started |
 sam. 23 juin 2007, 20:34
Message
#1
|
|
|
Newbie Groupe : Members Messages : 2 Inscrit : 23 juin 07 Lieu : Hamilton - US Membre no 92,405  |
Hi folks,
I have switched from a pc to a mac for recording music. I have a dual 866 G4. I have two issues. How do I get my audio into the mac? Previously, I used a sound card (M Audio Audiophile 24/96) with a pair of stereo RCA ins and outs that went to my mixing board's stereo ins and outs. This sound card won't fit into my mac. For now I just need to get the stereo mix from my mixing board to the computer and be able to get whatever's been recorded back out to my mixer. On the MIDI end, I used a MOTU interface (Micro Express). The issue here is that the interface uses parallel ports or serial ports to connect to a computer and the mac G4 has USB ports. Is there an adapter or a cable that can make the connection for me. I know these are basic questions, but I appreciate your help. |
 |
 
|
 |
Réponse(s)
|
dim. 24 juin 2007, 11:12
Message
#2
|
|
 Junior Member  Groupe : Members Messages : 122 Inscrit : 16 juil. 06 Lieu : London - UK Membre no 81,499 |
From your desciption, it sounds like you have a Mirrored Drive Doors dual 867Mhz, is that correct?
http://support.apple.com/specs/powermac/Po...rive_Doors.html If so, you have stereo mini-jack line-in and line-outs on the rear of the unit. Depending on your operating system, you can either select built-in audio as your audio device to use these (up to 10.3.9) or create an aggregate audio device in Audio/Midi Setup in 10.4. On the midi front, you should probably get the Gee Three Stealth serial adaptor: http://www.geethree.com/stealth/index.html which replaces the built-in modem. Its pretty cheap (under $50 US) and easy to fit - although you can get simple USB midi interfaces for about the same price, so perhaps you could consider upgrading to one of these. -------------------- www.myspace.com/commercialmusicstudios
|
|
|
|
|
dim. 24 juin 2007, 15:47
Message
#3
|
|
 Junior Member Groupe : Members Messages : 178 Inscrit : 27 janv. 03 Lieu : Austin - US Membre no 11,156 |
alton,
I think Jim has described some very good solutions for you. One alterntive on the serial to USB front is the Keyspan USB High Speed Serial adapter. On you M-Audio card, what is it that won't fit? the M-Audio card specs show that it should work (minimum system spec is a G3, so your G4 should have the same or better PCI card slot specs). The MDD G4 has the following spec for PCI: "Four open 64-bit, 33MHz PCI slots" Are all your slots full? The driver for the card for your Mac is available from their web site as well. peace. -------------------- |
|
|
|
Les messages de ce sujet
alton1 Audio And Midi Interfaces-getting Started sam. 23 juin 2007, 20:34
emgcarra Hi Alton1, Welcome to the forum...
First of all, ... dim. 24 juin 2007, 17:11
afrost59 Depends on how many inputs you need
Presonus is s... dim. 24 juin 2007, 18:37 |
6 utilisateur(s) sur ce sujet (6 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :
