Setting Up Dp 4.6 |
mer. 14 mars 2007, 21:57
Message
#1
|
|
Newbie Groupe : Members Messages : 15 Inscrit : 14 juin 05 Lieu : Clacton-on-Sea - UK Membre no 66,796 |
Hi Everybody who knows more than me, and that is EVERYBODY.
Here is my set up, Hardware:- Mac G4 DP 1.42Ghz FW800, 2 Gb Ram, dual HD 120 Gb, MOTO 2408MkII (423?), Spirit digital 328 mixer + loads of various outboard efx. Software:- DP 4.6 ( Just had licence transferred so can now install) OS X 10.4.9 I will have this machine for music only, no other apps to be installed. Question is:- What can I strip the OS down to so as to free up CPU from tiresome not needed rubbish? I am assuming that I can leave out printers, languages (except English), but can I get rid of Mail, Safari, Dashboard, screensavers and other such things and if so, How? Also is there any thing else I can take out that is not needed to free up the CPU and memory? Thank you in advance |
|
|
Réponse(s)
lun. 19 mars 2007, 04:53
Message
#2
|
|
Moderator In Chief (MIC) Groupe : Editors Messages : 15,189 Inscrit : 23 déc. 01 Lieu : Paris - FR Membre no 2,758 |
OS X uses virtual memory to be RAM efficient, the file used by the system is called a swap file, that's all the mystery.
The size of the max swap file is proportional to your installed RAM. I don't remember the exact formula (it's on the net somewhere but right now all the google return I got were contradictory…). ONE thing is sure though, it must be bigger than your installed RAM. For example, I have 2.5 GB of RAM and a 3 GB partition for the swap files, now it's ok for me as it swells rarely over 1 GB, and even more rarely up to 2 GB? But it depends on the apps you use, and how many you launch etc. What is a partition? When you have a large drive (meaning, all current drives now…) you can divide it into smaller parts: partitions. It's simply done into the Apple disk utility (you can access to it with the install DVD, it under the utilities menu). There, you select the physical volume (the hard drive itself) and create as many partitions as needed (or keep only one, you decide), resize them (do not do all that if there's data on the drive!!!!), name them. If you plan a separated partition for the swap file, it must be the first one created (top of the utility), for its size, ar least 3-5 GB sometimes more (I gave you my experience, it can be different). then it depends on how many drives you have. In your case, there's 2 drives, one will host 2 partitions (swap and system/apps/etc) and the second all the audio files. As you have a SCSI chain, you can use it for back up while working and samples. Note that the SCSI, under RAID 0 may be faster than the IDE drive so it could be better used this way. Now, you can instal up to 4 drives in your G4, so you can think about adding to the system as cash allows 2 other drives and hav back ups, an internal RAID… it's up to you. Nothing is set in stone. The separate swap partition is not mandatory but it keeps things clean and convenient, you can reformat easily the swap partition if you want (the partition, not the drive!) or even if there's a third drive inside move it there. Also, the swap will not interfere into the system partition usage as nothing save the swap files will be on this partition. The more you separate the different drive uses amongst different drives, the more you add little bits going faster. Now the best improvement will anyway to have the audio and samples on their respective drives. To sum up: - think about what will goes where (swap, system/apps, samples, audio) - separate drive uses as much as possible - use the fastest for 1/audio 2/ samples 3/swap - think beforehand of your back up strategy while working and for archiving. Especially if you use a RAID 0 somewhere. -------------------- Our Classifeds • Nos petites annonces • Terms Of Service / Conditions d'Utilisation • Forum Rules / Règles des Forums • MacMusic.Org & SETI@Home
BOING BUMM TSCHAK PENG! Are you musician enough to write in our Wiki? BOING BUMM TSCHAK ZZZZZZZZZZZOING! Êtes-vous assez musicien pour écrire dans le Wiki? |
|
|
Les messages de ce sujet
Top of Setting Up Dp 4.6 mer. 14 mars 2007, 21:57
lepetitmartien Sure, not installing the printers or langage will ... jeu. 15 mars 2007, 06:42
Top of QUOTE (lepetitmartien @ Thu 15 Mar 2007, 06... dim. 18 mars 2007, 12:54
kwasi Hey Lepetitmartien, You just answered three or fou... mar. 20 mars 2007, 01:59
lepetitmartien Fortunately I know I don't know everything and... mar. 20 mars 2007, 03:18
Top of Thanks Lepetitmartien, I think I have got it, if n... mar. 20 mars 2007, 21:49
lepetitmartien Sure, not installing the printers or langage will ... jeu. 15 mars 2007, 06:42
Top of QUOTE (lepetitmartien @ Thu 15 Mar 2007, 06... dim. 18 mars 2007, 12:54
kwasi Hey Lepetitmartien, You just answered three or fou... mar. 20 mars 2007, 01:59
lepetitmartien Fortunately I know I don't know everything and... mar. 20 mars 2007, 03:18
Top of Thanks Lepetitmartien, I think I have got it, if n... mar. 20 mars 2007, 21:49
1 utilisateur(s) sur ce sujet (1 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :