 Firewire 410 And Pismo, Cyclic Noise on the 410 |
 sam. 18 déc. 2004, 12:18
Message
#1
|
|
 Newbie Groupe : Members Messages : 20 Inscrit : 03 févr. 03 Lieu : Lisbon - PT Membre no 11,396  |
Hi all,
Hope you can help me. I´ve tried several times to run a M-audio Firewire 410 interface on a pismo 500mhz with macOS 9.2.2, and I get a cyclic noise when playing back sounds whatever the aplication is, (logic 4.8, Peak 2.6, spark 1.5 or Max/MSP 4). The noise looks like a amplitude problem but repeats itself with a 2 or 3 second interval. I tried several latency buffers from 32 to 1024 samples with several sampling rates like 44.1, 48 or 96 in both 16 and 24 bit word, without any result and not avoiding the noise... Does anyone have a similar problem? Any clues? The same interface runs quite invisible on a powerbook g4/867... M-audio can not check the problem... thanks in advance, kactus |
 |
 
|
 |
Réponse(s)
 dim. 19 déc. 2004, 01:16
Message
#2
|
|
 Moderator In Chief (MIC)  Groupe : Editors Messages : 15,189 Inscrit : 23 déc. 01 Lieu : Paris - FR Membre no 2,758 |
Reminds me some annoyance by hard drive accesses… Do you use an external Hard Drive too ?
Else, maybe some network activity… no other idea 
-------------------- Our Classifeds • Nos petites annonces • Terms Of Service / Conditions d'Utilisation • Forum Rules / Règles des Forums • MacMusic.Org & SETI@Home
BOING BUMM TSCHAK PENG! Are you musician enough to write in our Wiki? BOING BUMM TSCHAK ZZZZZZZZZZZOING! Êtes-vous assez musicien pour écrire dans le Wiki? |
|
|
|
Les messages de ce sujet
kactus Firewire 410 And Pismo sam. 18 déc. 2004, 12:18
divan try to disconnect the power supply from your pismo... dim. 19 déc. 2004, 19:49 kactus No, I dont use a external hard drive, but now that... dim. 19 déc. 2004, 19:53
lepetitmartien got to search…
If you can easily change the dr... lun. 20 déc. 2004, 03:07 |
2 utilisateur(s) sur ce sujet (2 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :
