MacMusic.org  |  PcMusic.org  |  440Software  |  440Forums.com  |  440Tv  |  Zicos.com  |  AudioLexic.org
Loading... visiteurs connectés
> Mixer Setup Suggestions?, not sure what to do now..
Drifta
posté ven. 15 oct. 2004, 16:35
Message #1


Newbie


Groupe : Members
Messages : 15
Inscrit : 06 avril 03
Lieu : Hamburg - DE
Membre no 15,642




Hello all,

I've come to an interesting point in the growth of my studio and I'm a bit stuck on where to go now. Just a brief rundown of what I've got:

3 mixers:
16 channel which i'm using as my main board (mackie 1604).
24 channel rack thay i'm running all the synths/sampler to (this has a submix bus).
8 channel that i'm going to use for analogue instruments (has stereo out and monitor out).

recording:
ADAT (not in use at the moment)
Mac G3 (yosemite) with M-Audio Delta 44.

Right now I have the mains from the 24ch and 8ch running to 4channels (2 stereo) on the 16ch. I have delta mains (2ch) also to the 16ch.

The problem is that I want to be able to do live jam recording without mixing it stereo first. The same problem occurs with synth recording, I either record 1 synth at a time or mix multiple synths to stereo and record that. I think it would be better to have each source on it's own track.

Is there a way to do this without buying like a 16 input recording interface? If I were to get a more recordable ins, how would I set up the mixers so that I could utilize them? Something like direct outs to a patchbay? I guess I'm just getting confused about what to do now to grow. I'd like to have a drumset somewhere (another at least 4 channels of input needed)..

I'm starting to get a bit tangled here thinking of what/how to write this stuff in an understandable way. Perhaps it would be easiest to stop here and try answering questions you might have. I'll run down what I have as far as sound sources:

approx 32 ch of synth outs
up to 16 ch of analogue outs
the 3 mixers
and 4 ch audio ins from sound card.

...ok. now i'm gettin' batty blink.gif .

i'll answer any questions you have, and would LOVE suggestions on gear, setup or other that you might have!!!

thanks,
John
Go to the top of the page
 
+Quote Post
 
Start new topic
Réponse(s)
ourmanflinty
posté mer. 17 nov. 2004, 14:36
Message #2


Junior Member
***

Groupe : Members
Messages : 191
Inscrit : 17 août 04
Lieu : London - UK
Membre no 48,982




christ don't go windows you'll get into a whole other bunch of setup shite and feel really suicidal as all the virii and crashes start rolling in...your mac should handle more than 8 tracks even to the internal drive unless it's in bad shape / nearly full, you got a scsi card? That would really help, 24 tracks easy to a scsi drive, adaptec or atto card, single or dual channel, adaptecs are really cheap, scsi drives cost a little more than ide's but deliver, buy second hand seagates and you usually get a five year warranty, they will send you a refurb if it fails, you can check the serial number online blah blah blink.gif


--------------------
Simon Flinn
Install & Support Eng, Maintenance, Analog & Digi Electronics
Dist/Dlr background, Fast & Friendly, London & SE Based.
freelance studio support click here
Go to the top of the page
 
+Quote Post

Les messages de ce sujet


Reply to this topicStart new topic
1 utilisateur(s) sur ce sujet (1 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :

 

Version bas débit - dimanche 1 déc. 2024, 07:29
- © 440 Forums 2011