Nec Lcd1715 (good On Ibm) Not Working With Mac, CRTs work with MAC but not LCD? Options

[AdriMagnon]

Hi,

I have an NEC/Mitsubishi LCD Monitor (model 1715) that isn't working on my Mac. I used to have a 21" CRT but put that on my IBM Compatible. It works fine there. I then took my LCD and moved it to the Mac and nothing. I get a "No Signal" error. The Mac starts and I can hear it spinning but no monitor. So I tried the original monitor and it works. I then tried an older CRT and that works on the Mac. But then the LCD once again does not. If I put the LCD on the IBM it works. I thought maybe the Mac needed time to find it so I started everything and walked away -- still no signal.
The Mac has this video adapter that has four settings on it for various screen resolutions (like 1024x768 and 832x624) and I tried them all.
The manual for the monitor says:

The LCD1515/LCD1715 is a TFT LCD monitor that is intelligent, microprocessor-based and ergonomically designed display, compatible with most analog RGB (Red, Green,Blue) display standards, including PS/V, PS/2, optional for Apple Macintosh Centris, Quadra,and Macintosh II family signals. The LCD monitor is capable of displaying crisp and vibrantcolor graphics with VGA, SVGA, XGA (non-interlaced), SXGA (LCD1715 only) and most Macintosh compatible color video cards.

It also says under its "Commands" section [Bold Mine]:

Mode          Resolution          HFreq(KHz) Band Width(MHz) Polarity(H,V)
1.........VGA...720x350...70Hz...31.47Hz.......28.322................+,-
2.........VGA...720x400...70Hz...31.47Hz.......28.322................-,+
3.........VGA...640x480...60Hz...31.47Hz.......25.175................-,-
4.........MAC...640x480...66Hz...35.00Hz.......30.24.............-,-
5.........VESA...640x480...702z...37.86Hz.......31.5................-,-
... [Cut] ...
9.........VESA...800x600...72Hz...48.08Hz.......50.0.................+,+
10........MAC...832x624...75Hz...49.72Hz.......57.283..........-,-
11........VESA...1024x768..60Hz...48.36Hz.......65.0.................-,-

I am running OS8 and used the computer for Print Design.

I bought the Mac awhile ago and will see later when I get home if I can find what model it is, I think off hand its a Quadra.

Does anyone have any ideas what this could be? I searched around the net and either my Googling is subpar or nobody had trouble getting this monitor to work on their Macs.

Thanks in advance for any help,

Adrian

[AdriMagnon]

Hi,

Thanks for the advice. What I eneded up doing was calling my local Mac store and they said I needed an Apple brand Mac to VGA adapter.
I went and picked one up for $14. When I got home the LCD was dark for a few moments and then turned on. All is good now.

Thanks Again,

AdriMagnon