|
|
Nouveau Driver Fw-1884 |
|
|
|
sam. 10 avril 2010, 10:50
|
Senior Member
Groupe : Members
Messages : 289
Inscrit : 17 juil. 02
Lieu : Les Lilas - FR
Membre no 5,967
|
Ici : http://www.tascam.com/details;9,14,46,19.html32bit Snow LeopardCitation TASCAM FW-1884 Software and Firmware Update Version 1.7.0 - OS X ReadMe file
Welcome to FW-1884 update version 1.7.0. This image file contains the following applications:
- FW-1884 Installer - FW-1884 Remover - FW-1884 Updater - This ReadMe file
FW-1884 Installer automatically places all of the files necessary for using your FW-1884 with an OSX based Macintosh computer. Simply double click on the icon and follow all on-screen instructions. A Restart will be required.
Please note; the installer requires that your FW-1884 is powered OFF during the installation process.
Application specific Plug-In files, such as those for Digital Performer or Logic Audio, are not installed by this application and can be downloaded and installed separately.
FW-1884 Remover can be used to remove all FW-1884-specific files from your computer. As with the installer, your FW-1884 should be powered OFF before running the remover.
FW-1884 Updater is an easy to use new addition to this set that will update the firmware in your FW-1884 hardware to the latest version available. FW-1884 Updater should be run while the FW-1884 is connected and powered ON. Make sure all other applications are closed before running the updater program. The Updater will identify your FW-1884 and any FE8 fader expansion units that you have connected, then allow you to update all devices or only those which do not have current firmware. When you begin the update process each device name in the list will turn Red while it is being updated. Once all devices in the list have been updated the program will re-initialize them and turn all names to Green to signify the process is complete. You should run FW-1884 Updater *after* running the FW-1884 Installer.
What's new in software version 1.7.0;
Support for Intel Macintosh computers with more than 2 GB of memory installed running Mac OS X 10.5 ("Leopard") or later. Fini les freezes lorsqu'on allume la carte après la machine. Je l'ai découvert par hasard, alors je fais passer le mot.
Ce message a été modifié par diego - sam. 10 avril 2010, 10:53.
--------------------
Mac Pro Xeon 2,66 (12 Go Ram) / Mac OS 10.6.5 / Logic Pro 9.1.3 / Tascam FW 1884 + FE-8 / 2 UAD-2 Duo (la totale en plugs) / Kore & Guitar Rig hard / CME UF-8
|
|
|
|
|
|
2 utilisateur(s) sur ce sujet (2 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :
|
|
|