 Mbox |
 mer. 15 juil. 2009, 07:37
Message
#1
|
|
|
Newbie Groupe : Members Messages : 2 Inscrit : 15 juil. 09 Lieu : Nunawading - AU Membre no 109,633  |
Hi everybody, I'm new here and have a question.
Just bought a new imac 2.66 24". I have the stand up version of mbox and am wondering if this is any good with GarageBand, I don't seem to be able to get it to work a all. Any suggestions would be appreciated guys.T/Y |
 |
 
|
 |
Réponse(s)
(1 - 7)
|
jeu. 16 juil. 2009, 05:39
Message
#2
|
|
 Junior Member  Groupe : Members Messages : 145 Inscrit : 24 avril 04 Lieu : Knoxville - US Membre no 41,728 |
Hmm. . .
I could be wrong here, but I think ProTools hardware is proprietary, meaning you can only use ProTools software with the mBox. Therefore, I don't think you'll have any luck getting GarageBand to work with it. I use a Firebox from PreSonus for my interface. You should check it out. |
|
|
|
|
jeu. 16 juil. 2009, 13:29
Message
#3
|
|
|
Newbie Groupe : Members Messages : 22 Inscrit : 03 juin 09 Lieu : Central Valley - US Membre no 109,043 |
I believe you can use the MBox with other DAW's. I know people that use it with Sonar.
With GarageBand open, go to GarageBand |"Preferences" and the under the "audio/midi" tab, make sure you have selected the MBox for audio input and output |
|
|
|
|
ven. 17 juil. 2009, 07:14
Message
#4
|
|
|
Newbie Groupe : Members Messages : 11 Inscrit : 25 oct. 06 Lieu : Madison - US Membre no 84,590 |
I've successfully used my MBox 2 Pro with Logic, GarageBand and Digital Performer. I may be wrong, but I think it's easier to make Digi hardware work with other software than it is to use ProTools with most non-Digi hardware (I suspect M-Audio hardware may be an exception, although it may depend on the version of ProTools you have.)
|
|
|
|
|
ven. 17 juil. 2009, 08:06
Message
#5
|
|
 Junior Member Groupe : Members Messages : 122 Inscrit : 16 juil. 06 Lieu : London - UK Membre no 81,499 |
Make sure you have the latest Digidesign Core Audio driver from:
http://www.digidesign.com/index.cfm?langid...mp;itemid=33009 and you should have no problem using your interface with any Core Audio compliant software. You may find that you are unable to run more than one piece of audio software at the same time (eg GarageBand and iTunes), but this is normal behaviour for Digidesign gear. The rule is that you can use Digi hardware with any software, but ProTools will ONLY work with a Digidesign or appropriate M-Audio interface. -------------------- www.myspace.com/commercialmusicstudios
|
|
|
|
|
ven. 17 juil. 2009, 10:20
Message
#6
|
|
|
Newbie Groupe : Members Messages : 22 Inscrit : 03 juin 09 Lieu : Central Valley - US Membre no 109,043 |
QUOTE (Jim Hoyland @ Fri 17 Jul 2009, 03:06)  Make sure you have the latest Digidesign Core Audio driver from: http://www.digidesign.com/index.cfm?langid...mp;itemid=33009 and you should have no problem using your interface with any Core Audio compliant software. You may find that you are unable to run more than one piece of audio software at the same time (eg GarageBand and iTunes), but this is normal behaviour for Digidesign gear. The rule is that you can use Digi hardware with any software, but ProTools will ONLY work with a Digidesign or appropriate M-Audio interface. What Jim says is correct. ProTools will ONLY work with a proprietary Digidesign or "M-Powered" (M-Audio) interface. |
|
|
|
 jeu. 23 juil. 2009, 11:50
Message
#7
|
|
|
Newbie Groupe : Members Messages : 2 Inscrit : 15 juil. 09 Lieu : Nunawading - AU Membre no 109,633 |
Hi everybody,
Thanks for the advise, I downloaded the Digidesign Core Audio driver as suggested and bingo! All is well. Thanks again. |
|
|
|
|
ven. 24 juil. 2009, 06:32
Message
#8
|
|
|
Newbie Groupe : Members Messages : 2 Inscrit : 17 févr. 08 Lieu : Spencer - US Membre no 98,921 |
TRY THROWING OUT SYSTEM FOLDER
|
|
|
|
 |
2 utilisateur(s) sur ce sujet (2 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :
