MacMusic.org  |  PcMusic.org  |  440Software  |  440Forums.com  |  440Tv  |  Zicos.com  |  AudioLexic.org
Loading... visiteurs connectés
> Mbox 2 With Logic, How do I use my MBox 2 with Logic Express 8?
ntrprts
posté jeu. 5 juin 2008, 22:39
Message #1


Newbie


Groupe : Members
Messages : 3
Inscrit : 05 juin 08
Lieu : Santa Monica - BA
Membre no 101,552




Hello all, I recently purchased the Mbox 2 which came with the ProTools LE software disk. On my Mac, I have both ProTools LE and Logic Express 8. I was told it's best to record into Logic and then do most of my mastering in ProTools. The Mbox works instantly with ProTools but I was wondering if anyone could walk me through how I get Logic to read and record through the MBox? Any help would be greatly appreciated! Thanks!

Ok, I went into the Logic preferences and saw that I could change the input to the Mbox. Now, I can hear the guitar and it's obviously being picked up by Logic through the Mbox, but when I hit record the tracking bar starts moving and I can hear the metronome, but no actual recording appears. As though I just hit the space bar to start playing it without having recorded anything. Any ideas?

-Mischa

Ce message a été modifié par ntrprts - jeu. 5 juin 2008, 22:54.
Go to the top of the page
 
+Quote Post
 
Start new topic
Réponse(s) (1 - 6)
Mac Daddy
posté ven. 6 juin 2008, 05:15
Message #2


Advanced Member
*****

Groupe : Members
Messages : 348
Inscrit : 10 févr. 06
Lieu : Hamburg - DE
Membre no 76,633




ntrprts {I recently purchased the Mbox 2 }

Dear ntrprts... I have seen more Posts with problems regarding The Mbox than all "Tech Problems" combined... To hear that the Mbox 2, obviously NEW has continued the tradition...

On another note I think your Pro Tools Logic 8 remark is pretty accurate "record into Logic and then do most of my mastering in ProTools"

You have the best of both Music Software... However, the Mbox.... Too bad about that... My advice "Get Professional Gear ONLY. Especially Hardware. It will be interesting to see how long this Mbox 2 issue lasts. Good Luck ntrprts.

Yobrofosho,

Mac Daddy
Go to the top of the page
 
+Quote Post
qusp74
posté ven. 6 juin 2008, 07:51
Message #3


Member
**

Groupe : Members
Messages : 62
Inscrit : 10 juil. 07
Lieu : Brisbane - AU
Membre no 92,865




ntrprts,

Have you got the track 'Armed' for recording? there's a little red button with an R in it on each track in the logic mixer and arrange window; when you click that logic should prompt you with a dialog box asking you to choose a location to record to. Also on each track there is an input and output dropdown; you will need to select your source in the input; and the tracks you wish to monitor the recording with on the output.

The MBOX IS notorious for being finicky when not using it solely with protools unfortunately, but before we write it off as a hardware problem, see if it is setup properly. after buying the MBOX you probably aren't going to rush off and buy another PRO interface, although I would recommend you DO as soon as you can

hope this helps

Cheers


--------------------
Jeremy Glover graphic designer and compositor extraordinair but a relative novice at audio
Mac G5 1.8DP 4gig ram .. RME Hammerfall DSP 9632 .. Behringer ADA8000 adat interface
• KRK ROKIT 6 and RP10S•Micro korg Synth/vocoder with RODE NT2-A
Logic pro 7 NI kontakt, battery FM8, Altiverb Arturia Moog modular minimoog arp2600.
Go to the top of the page
 
+Quote Post
manuramesan
posté ven. 6 juin 2008, 10:58
Message #4


Newbie


Groupe : Members
Messages : 4
Inscrit : 27 mars 08
Lieu : Cochin - IN
Membre no 99,883




so if your mbox is getting recognised by logic, there is no need, but when i had that trouble, i had to download the latest version of core audio driver from digidesign. i am having digi 002 rack. after you have installed that coreaudio driver, the hardware appears in the audio devices list, inside logic's audio preferences....

this is the link for downloading core audio drivers, for intel macs

http://digidesign.com/index.cfm?navid=3&am...00&eid=1169



links for core audio ppc

http://digidesign.com/index.cfm?navid=3&am...100&eid=601



about the recording, did you check the track inputs and all? if nothing gets recorded, the possible reason could be that your input is routed to somewhere else and the input of the record enabled track is different.
Go to the top of the page
 
+Quote Post
ntrprts
posté jeu. 19 juin 2008, 03:03
Message #5


Newbie


Groupe : Members
Messages : 3
Inscrit : 05 juin 08
Lieu : Santa Monica - BA
Membre no 101,552




Hey there, thanks for the reply. Yeah, I'm hearing more and more that the Mbox may not have been the best choice. Anyway, my next question is, Logic seems to be picking up the input from my guitar through the Mbox (as in the sound bars go up and down when I play the guitar), and I've "armed" the track by making sure the "R" button is red, but it just doesn't show a recording...the track bar only moves. Any ideas?

-Mischa

Go to the top of the page
 
+Quote Post
Dasa Soul
posté jeu. 19 juin 2008, 07:55
Message #6


Junior Member
***

Groupe : Members
Messages : 179
Inscrit : 13 mars 04
Lieu : Hawaii North Shore Oahu - US
Membre no 38,418




Aloha!! on Logic Pro 7 to record on a Audio track ,you have to Set Audio Record Path, that is on the main Logic top menu>Audio>set recording path , a window will open all you have to do is chose the length time ,15 min is the default cool.gif
Go to the top of the page
 
+Quote Post
ntrprts
posté dim. 22 juin 2008, 00:17
Message #7


Newbie


Groupe : Members
Messages : 3
Inscrit : 05 juin 08
Lieu : Santa Monica - BA
Membre no 101,552




I don't see a direct "Audio" drop down window. I did find "audio" under something else but nothing that implied I could change the recording path. Maybe because this is Logic "Express?"

-Mischa
Go to the top of the page
 
+Quote Post

Reply to this topicStart new topic
2 utilisateur(s) sur ce sujet (2 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :

 

Version bas débit - jeudi 12 déc. 2024, 01:33
- © 440 Forums 2011