 No Audio Please Help |
 lun. 17 avril 2006, 00:38
Message
#1
|
|
 Rookie  Groupe : Members Messages : 29 Inscrit : 04 avril 06 Lieu : New York - UK Membre no 78,897  |
So here's the problem. I'm running a Firewire Solo for my Audio. M Audio Uno USB for Midi. The Midi works fine to record. The audio works fine to record. However, when I go to playback I get a signal from Logic and also through my Firewire...everything LOOKS fine, but no audio. If I switch my Core Audio over to Built-In Audio everything comes out great, but I need to record through the Firewire. Advice?
|
 |
 
|
 |
Réponse(s)
(1 - 2)
|
lun. 17 avril 2006, 00:39
Message
#2
|
|
|
Rookie Groupe : Members Messages : 29 Inscrit : 04 avril 06 Lieu : New York - UK Membre no 78,897 |
oh and I DO have software monitoring on...still nothing
|
|
|
|
|
lun. 17 avril 2006, 15:01
Message
#3
|
|
|
Junior Member Groupe : Members Messages : 110 Inscrit : 20 févr. 04 Lieu : ACT - AU Membre no 36,296 |
Hey I might have the same problem a little different i'll run you through all the tests i did to check what it was
question When you record you hear yourself playing right in your Cans ? Do you get this problem when you Boot the computer or even with out (standalone) or just when in logic ? 1) get the lattest Driver Update for ya audio interface 2) check in logic audio window (audio hardware& drivers ) you got your Audio interface driver selected and enabled / software monitering on > if no go from there not to sure .. problem with logic/and your audio interface maybe the driver ....i think? If its your Mac Just do a quick reset = hold down Option +Apple+ P+ R i don't think you need to do a a full reset. opps and another thing i just thought of prob a dumb question but its a simple thing i stuffed up once ... go to your sound and select your output and listen to it through head phones check that to ... f your still in a puzzle i am not sure Good luck |
|
|
|
 |
1 utilisateur(s) sur ce sujet (1 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :
