 Maxtor External Hds, HDs won't daisy chain |
 lun. 25 oct. 2004, 17:07
Message
#1
|
|
 Newbie Groupe : Members Messages : 3 Inscrit : 15 févr. 04 Lieu : Berlin - DE Membre no 35,906  |
Hi, I recently got a second Maxtor ext HD to chain with the older 5000 series HD. I've not activated the Retrospect Express app. My powerbook crashes when I plug them both in but both work on their own. However--on my iBook they daisy chain just fine. I assume there's a config issue in the powerbook- any advice on this? Thanks in advance from Bonzulu
|
 |
 
|
 |
Réponse(s)
(1 - 2)
|
ven. 12 nov. 2004, 20:30
Message
#2
|
|
 Junior Member  Groupe : Members Messages : 120 Inscrit : 10 juil. 02 Lieu : Minneapolis - US Membre no 5,668 |
If the OS is different on the Powerbook this might be your issue. Just visit the Maxtor site and you should find something worth value in the downloads, Otherwise you Powerbook may just be out of date on fireware. try updating that to.
If all else fails get a couple Seagate drives hehehe 
-------------------- BING BING BLEEP ERRRRRRR[I]
|
|
|
|
 sam. 13 nov. 2004, 05:18
Message
#3
|
|
 Moderator In Chief (MIC)  Groupe : Editors Messages : 15,189 Inscrit : 23 déc. 01 Lieu : Paris - FR Membre no 2,758 |
I have 3 maxtors connected to now my G5, previously on my G3. the obvious reason can be the OS question, if you move the drives between OS 9 and OS X you are GOING TO HAVE TROUBLES
 Keep them in OS 9 or OSX only. Now, if it's not that. Check if the enclosures have not some firmware updates to make. try to use other cables (or swap them). Also: check the way you power them, start by powering the last on the chain first, then the next to last etc. -------------------- Our Classifeds • Nos petites annonces • Terms Of Service / Conditions d'Utilisation • Forum Rules / Règles des Forums • MacMusic.Org & SETI@Home
BOING BUMM TSCHAK PENG! Are you musician enough to write in our Wiki? BOING BUMM TSCHAK ZZZZZZZZZZZOING! Êtes-vous assez musicien pour écrire dans le Wiki? |
|
|
|
 |
1 utilisateur(s) sur ce sujet (1 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :
