 ProTools Audio Media 3 Multi track recording question, I get no signal going into S/PDIF inputs. |
 jeu. 4 avril 2002, 05:44
Message
#1
|
|
 Newbie Groupe : Members Messages : 2 Inscrit : 03 avril 02 Lieu : Los Angeles Membre no 4,108  |
I want to do multi track live recording on Pro-Tools. So, I'm cool with the RCA inputs. But when I try and put regular RCA's into the S/PDIF slots, I don't get a signal from the #1/3 and #1/4 I/O interface selections and they're not bold like the #1/1 and #1/2 ones are.
Do I need a special S/PDIF chord? Does my sound source need to go through a digital optical device? Do I have to do something different in my I/O set up? Thanks. |
 |
 
|
 |
Réponse(s)
(1 - 2)
|
jeu. 4 avril 2002, 16:48
Message
#2
|
|
|
Groupe : Messages : 0 Inscrit : -- Membre no 0 |
Are you asking if you have to input a digital signal into your digital input then the answer is 'yes'. For instance, the S/PDIF digital output on a DAT or ADAT machine (both left and right go down the same cable). Regular RCAs work with that.
An analog signal will hit a dead end in the S/PDIF port. |
|
|
|
|
ven. 5 avril 2002, 02:52
Message
#3
|
|
|
Newbie Groupe : Members Messages : 2 Inscrit : 03 avril 02 Lieu : Los Angeles Membre no 4,108 |
Thanks for the reply.
So, what do I do if I want a live instrument like a keyboard, mic or guitar to go in my S/PDIF input? Are there digital devices that can be used between the sound source and the sound card in a live setting? And can I use both S/PDIF connectors as separate inputs, or are they just 1 in 1 out? |
|
|
|
 |
1 utilisateur(s) sur ce sujet (1 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :
