MacMusic.org  |  PcMusic.org  |  440Software  |  440Forums.com  |  440Tv  |  Zicos.com  |  AudioLexic.org
Loading... visiteurs connectés
> Us-122 Not Compatible W/ Tiger?, US122 not functioning after upgrade
eheilner
posté sam. 2 juil. 2005, 20:24
Message #1


Newbie


Groupe : Members
Messages : 7
Inscrit : 07 févr. 04
Lieu : Montclair - US
Membre no 35,208




After upgrading from Panther to Tiger, my US-122 stopped functioning. The USB light does not go on, and my computer does not find the US-122. I called up Tascam support; after being on hold for about an hour, they had me delete all US122 files, restart my computer, and re-install the 323 software. No luck. Tascam support told me that the problem must be with my computer running under Tiger, since (a) They have had no problems running under Tiger, and (b) the unit was working on my son's iBook running under Panther.

To verify that the problem was my computer, I upgraded my son's iBook to Tiger. However, once I installed Tiger on my son's laptop, the unit stopped functioning, and now the USB light does not go on when attached to my son's machine. So just to triple check, I installed the 323 software on my daughter's iBook, which is still running Panther. The USB light went on immediately!

Tascam support insists that there are no problems running under Tiger, yet I have reproduced the problem on two computers. All suggestions are welcome, but yes, I've tried switching cables, USB ports, etc, etc. If it matters, my computer is a four year old G4 (Silver CD Doors) running 10.4.1 and my son's laptop is a 4 year old G3 iBook Dual USB running vanilla 10.4.

Am I the only person experiencing this problem? I'm hoping to keep this unit, since it has been performing fine for a year and a half. But if it doesn't run under Tiger, then I shall have to replace it (and it won't be a Tascam product). Thanks in advance for any help you can provide.
Go to the top of the page
 
+Quote Post
5 Pages V  < 1 2 3 4 5 >  
Start new topic
Réponse(s) (20 - 29)
hahaworld
posté dim. 28 août 2005, 12:36
Message #21


Junior Member
***

Groupe : Members
Messages : 145
Inscrit : 24 avril 04
Lieu : Knoxville - US
Membre no 41,728




Good for you, eheliner!

I had the same problem you did, so bravo for writing that letter to Tascam. Maybe someone will perk up over there and fix that glorified piece of plastic they're selling.

hahaworld
Go to the top of the page
 
+Quote Post
bigbandan
posté dim. 2 oct. 2005, 12:51
Message #22


Newbie


Groupe : Members
Messages : 4
Inscrit : 02 oct. 05
Lieu : Matamoras - US
Membre no 70,745




I have a tascam US-224 and am having the same problems. The unit worked fine in Panther; then I upgraded to Tiger. Tried reinstalling the Tascam 3.2.3 sit software about 5 times. No success. I will try calling Tascam on Monday but last time I called they were reluctant to help in the help department, oh yeah and they all have lunch 12 until 1. The power light works but no USB connection. Yes, I tried everything.
Go to the top of the page
 
+Quote Post
lepetitmartien
posté dim. 2 oct. 2005, 15:20
Message #23


Moderator In Chief (MIC)
Icône de groupe

Groupe : Editors
Messages : 15,189
Inscrit : 23 déc. 01
Lieu : Paris - FR
Membre no 2,758




I don't have time to read everything (I know, it's BAAAAAD wink.gif

But: OnyX is no more in beta for Tiger laugh.gif cool.gif


--------------------
Our Classifeds • Nos petites annoncesTerms Of Service / Conditions d'UtilisationForum Rules / Règles des ForumsMacMusic.Org & SETI@Home
BOING BUMM TSCHAK PENG! Are you musician enough to write in our Wiki?
BOING BUMM TSCHAK ZZZZZZZZZZZOING! Êtes-vous assez musicien pour écrire dans le Wiki?
Go to the top of the page
 
+Quote Post
fastlanephil
posté dim. 2 oct. 2005, 18:50
Message #24


Member
**

Groupe : Members
Messages : 94
Inscrit : 21 déc. 02
Lieu : Shelton - US
Membre no 10,225




The GPO stand alone Kontakt player won't work correctly with my US-122. That's the only problem i've run into so far. Remember to repair disk permissions in Apple's disk utility. Apps>utilities.
Go to the top of the page
 
+Quote Post
jewliscrumptious
posté mar. 4 oct. 2005, 15:52
Message #25


Newbie


Groupe : Members
Messages : 13
Inscrit : 04 oct. 05
Lieu : Derby - UK
Membre no 70,824




sad.gif
I know this hasn't been discussed for a while & maybe some of you have sorted it out? but I need your help. I am having a nightmare trying to install my Tascam US122 onto my iMac G5 running tiger Os X 10.4.
I have installed the files from the included std installation disk but it doesn't respond when the system restarts. I made sure not to have the usb connected when installing & have tried uninstalling etc but still nothing.

Now - I am a new mac user so feel free to point out ay stupid mistakes I may be making?

Just can't get it to communicate with my imac angry.gif

Help???? sad.gif
Go to the top of the page
 
+Quote Post
lepetitmartien
posté mar. 4 oct. 2005, 18:35
Message #26


Moderator In Chief (MIC)
Icône de groupe

Groupe : Editors
Messages : 15,189
Inscrit : 23 déc. 01
Lieu : Paris - FR
Membre no 2,758




In the French forum, someone else is trying the same interface with a brand new ibook/tiger, and to no avail.

Is your driver the 3.2.3? it's the mandatory one for 10.4.x. Also, are you in 10.4.0, 10.4.1 or 10.4.2? unsure.gif


--------------------
Our Classifeds • Nos petites annoncesTerms Of Service / Conditions d'UtilisationForum Rules / Règles des ForumsMacMusic.Org & SETI@Home
BOING BUMM TSCHAK PENG! Are you musician enough to write in our Wiki?
BOING BUMM TSCHAK ZZZZZZZZZZZOING! Êtes-vous assez musicien pour écrire dans le Wiki?
Go to the top of the page
 
+Quote Post
jewliscrumptious
posté mar. 4 oct. 2005, 21:43
Message #27


Newbie


Groupe : Members
Messages : 13
Inscrit : 04 oct. 05
Lieu : Derby - UK
Membre no 70,824




I think I am 10.4.0 (like I said I am still new to it) on my paperwork it just says 10.4.
huh.gif
Sorry still learning...
any help would be much appreciated



thanks
Go to the top of the page
 
+Quote Post
jewliscrumptious
posté mar. 4 oct. 2005, 23:30
Message #28


Newbie


Groupe : Members
Messages : 13
Inscrit : 04 oct. 05
Lieu : Derby - UK
Membre no 70,824




i have just found out that i have 10.4.2

I have installed the 3.2.3 driver from the tascam site & the imac does recognise it as a piece of hardware but the usb still doesn't light up & still no sound!

any ideas?

unsure.gif
Go to the top of the page
 
+Quote Post
lepetitmartien
posté mar. 4 oct. 2005, 23:50
Message #29


Moderator In Chief (MIC)
Icône de groupe

Groupe : Editors
Messages : 15,189
Inscrit : 23 déc. 01
Lieu : Paris - FR
Membre no 2,758




Before trying updates…

One user in the French forum says it works perfectly in Tiger BUT with the supposed Panther only driver… blink.gif


--------------------
Our Classifeds • Nos petites annoncesTerms Of Service / Conditions d'UtilisationForum Rules / Règles des ForumsMacMusic.Org & SETI@Home
BOING BUMM TSCHAK PENG! Are you musician enough to write in our Wiki?
BOING BUMM TSCHAK ZZZZZZZZZZZOING! Êtes-vous assez musicien pour écrire dans le Wiki?
Go to the top of the page
 
+Quote Post
jewliscrumptious
posté mer. 5 oct. 2005, 00:01
Message #30


Newbie


Groupe : Members
Messages : 13
Inscrit : 04 oct. 05
Lieu : Derby - UK
Membre no 70,824




QUOTE (lepetitmartien @ Oct 4 2005, 22:50)
Before trying updates…

One user in the French forum says it works perfectly in Tiger BUT with the supposed Panther only driver… blink.gif

crazyness!

thats what I have installed - still nothing - no usb lighting up - no sound.....

sigh! unsure.gif
Go to the top of the page
 
+Quote Post

5 Pages V  < 1 2 3 4 5 >
Reply to this topicStart new topic
4 utilisateur(s) sur ce sujet (4 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :

 

Version bas débit - mercredi 26 juin 2024, 17:39
- © 440 Forums 2011