Switched To Mac.. Digi002 Midi Problem, MIDI out, no MIDI in |
dim. 15 janv. 2006, 03:32
Message
#1
|
|
Newbie Groupe : Members Messages : 2 Inscrit : 15 janv. 06 Lieu : Wilmington - US Membre no 75,336 |
Hi. I recently bought a Powerbook, replacing a PC. I have a Digi002 that was functioning fine with the PC. With the Mac, the audio worked great immediately (not so on the PC btw), but the MIDI only works in one direction (the MIDI out of the DIGI). Since I'm new to OSX (10.3.9) I thought maybe there is something I'm missing in terms of setting up the MIDI to send and recieve.
(More info: the problem exists in both PT and 3rd party software) Thanks for your help. - Chris |
|
|
lun. 16 janv. 2006, 03:37
Message
#2
|
|
Moderator In Chief (MIC) Groupe : Editors Messages : 15,189 Inscrit : 23 déc. 01 Lieu : Paris - FR Membre no 2,758 |
Try the solution I gave here, as it's system wide in your case you're a good candidate.
Also, repair permissions after installs, always! use Apple drive utility. It helps sometimes. -------------------- Our Classifeds • Nos petites annonces • Terms Of Service / Conditions d'Utilisation • Forum Rules / Règles des Forums • MacMusic.Org & SETI@Home
BOING BUMM TSCHAK PENG! Are you musician enough to write in our Wiki? BOING BUMM TSCHAK ZZZZZZZZZZZOING! Êtes-vous assez musicien pour écrire dans le Wiki? |
|
|
dim. 22 janv. 2006, 03:00
Message
#3
|
|
Newbie Groupe : Members Messages : 2 Inscrit : 15 janv. 06 Lieu : Wilmington - US Membre no 75,336 |
Thanks for the quick reply. Tried deleting the MIDI related file, but to no avail (my old setup was still present when I rebooted). Also did the repair permission trick. This stuff scared me a little bit as I am completely new to Mac and don't know what I'm doing.. If anybody was any ideas I'm all ears though. I appreciate the help.
- Chris |
|
|
dim. 22 janv. 2006, 03:20
Message
#4
|
|
Junior Member Groupe : Members Messages : 115 Inscrit : 06 nov. 03 Lieu : Los Angeles - US Membre no 28,332 |
Are you using the MIDI Out of a keyboard to MIDI In of your Digi 002? Are you using a USB keyboard? If you are using a USB keyboard you might have to install drivers on your Mac. If it's straight MIDI Out to MIDI In it seems strange that only the MIDI Out would work. What exactly are you trying to do? Are you synchronizing with MIDI TC or just trying to play virtual instruments or hardware synths?
|
|
|
2 utilisateur(s) sur ce sujet (2 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :