Logic 7 Mulit-channel Instruments, How do I set them up properly? Options

[jarret the gobli...]

Hi,

Im having trouble setting up multi-channel instruments in Logic Pro 7.
I set up an AU instrument (e.g ESX24/Reaktor) as a multi-channel and then assigned its various outputs to different aux channels but i get no signal coming through.
Can anyone tell me where im going wrong?

Thanks.

[CuzCutz]

For the EXS, you should open the "EXS24 Instument editor" (in audio menu)...Then open the Instrument you want to use, & then make sure that the zone or zones that contains the sample(s) is routed to the same output as the aux ch....by placing a check mark next to "EXS output" (in the zone dialog) which will open up a menu. Pull down the menu, you should see the output assignments... Save instrument!
Hope this helps, Peace

[bogh]

You need to set up the Aux channels, that you are routing the sound through to.
You set up your multi-channel EXS instrument first, and send audio to output 3-4.
After that you need to set up an Aux object. The outputs of the newly created multi-ch instrument will now be available as inputs in the Aux object. Choose EXS ch.3-4 as the input on the Aux, and you can now route it to anywhere you like.