  |
 Reason 3 Issues |
 lun. 21 mars 2005, 18:41
Message
#1
|
|
 Member  Groupe : Members Messages : 98 Inscrit : 15 juil. 04 Lieu : - CA Membre no 46,955  |
hello everyone. i installed Reason 3 and i theres a lot of ''pop corn'' sounds when i playback my track. do you guys have the same problems?
i running Reason 3 on a Powerbook G4 500mhz with 512mb ram with a Firewire 410 thanx!!! 
|
 |
 
|
|
lun. 21 mars 2005, 20:52
Message
#2
|
|
 Member Groupe : Members Messages : 92 Inscrit : 05 févr. 04 Lieu : Philadelphia - US Membre no 35,039 |
I kind of got that too, but I realized that my sample rate was set to 96000 khz so it was killing the processor.
I set it to 44100 and the issue has sense been resolved. I am also using a FW410, but I am not sure if this is your issue. -------------------- Ableton Live 4.1
Reason 3 Mac OS 10.3.8 G5 Dual 1.8 Ghz 2 GB RAM 160 HD EzQuest 120 GB 7200 Firewire HD EzQuest 200 GB 7200 Firewire HD - Pro Audio M-Audio Firewire 410 (driver 1.4.3) Behringer B1 Microphone (2x) Behringer HPS3000 Headphones Yamaha DX-11 going through a MidiMate XP (Midi to USB adapter) |
|
|
|
|
lun. 21 mars 2005, 22:00
Message
#3
|
|
|
Rookie Groupe : Members Messages : 34 Inscrit : 11 nov. 04 Lieu : Malibu - US Membre no 54,793 |
QUOTE (Ziggomatic @ Mar 21 2005, 17:41) hello everyone. i installed Reason 3 and i theres a lot of ''pop corn'' sounds when i playback my track. do you guys have the same problems? i running Reason 3 on a Powerbook G4 500mhz with 512mb ram with a Firewire 410 thanx!!! Try checking what your latency setting it set at. Increasing it can lessen the demand on your processor. Also, depending on what's coming from disk you may want to run a disk utility and possibly need to defragement your hard disk. -Vincent |
|
|
|
|
mar. 22 mars 2005, 07:02
Message
#4
|
|
|
Rookie Groupe : Members Messages : 46 Inscrit : 01 mai 04 Lieu : West Hartford - US Membre no 42,258 |
Also, any popping or clicking is usually a clocking problem.
If 2 or more digital devices are being used, you need to address the house master first. Set your best clock source to internal and set the others to external. They should all be set to the same sampleing and bit depth as well. chap |
|
|
|
|
mar. 22 mars 2005, 07:05
Message
#5
|
|
|
Rookie Groupe : Members Messages : 46 Inscrit : 01 mai 04 Lieu : West Hartford - US Membre no 42,258 |
Wow, I'm a 'Rookie' now after doing this for 30 years.
It's like getting carded in a package store when you're 50 Time for a good old midlife crises. cheers, chap |
|
|
|
|
mar. 22 mars 2005, 18:44
Message
#6
|
|
|
Member Groupe : Members Messages : 98 Inscrit : 15 juil. 04 Lieu : - CA Membre no 46,955 |
i just finnish to format the computer and i'll reinstall Reason tonight. i'll give some news soon. I have 2 questions for you guys
It is possible to ''erase'' all the presets in the control of the devices? I mean, i have a radium 49 and buttons are allready mapped to something and it's kinda annoying... Wich driver do you recommand for the Firewire 410? I never saw any audio signal in the control panel and that piss me off. thanx for replies guys!
|
|
|
|
|
ven. 25 mars 2005, 20:59
Message
#7
|
|
|
Member Groupe : Members Messages : 98 Inscrit : 15 juil. 04 Lieu : - CA Membre no 46,955 |
ok so i formatted my hd, i reinstalled reason 3 and i still got glitches sometimes. Also, i installed the radium 49 driver and reason don't recognize it so i can't use alle the buttons/sliders
please help me thanx 
|
|
|
|
|
3 utilisateur(s) sur ce sujet (3 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :
