|
|
|
  |
 Carte Rme Rpm Et Powerbook !!!!, Problème d'installation |
|
|
|
|
 ven. 3 déc. 2004, 11:13
|
Newbie
Groupe : Members
Messages : 4
Inscrit : 17 juin 03
Lieu : Jambes - BE
Membre no 19,798
|
Pas moyen d'installer cette carte audio firewire sur mon powerbook! (os x 10.3)
Je suis les instruction (en anglais ) concernant les drivers du mieux possible .... rien a faire
Si quelqu'un a une idée... merci
|
|
|
|
|
|
|
|
ven. 3 déc. 2004, 13:50
|
Maniac Member
Groupe : Members
Messages : 665
Inscrit : 08 nov. 02
Lieu : - FR
Membre no 9,113
|
ben oui, justement - sur le site RME: (http://www.rme-audio.com/english/hdsp/cardpci.htm)
For some time now, laptops have become powerful enough for even ambitious hard disk recording thanks to high computing power and powerful hard drives. Up to now, a powerful interface was missing though. USB is neither offering the necessary bandwidth, nor the desired compatibility. Available PCMCIA solutions at the moment are nearly always designed as 16 bit PC Card and therefore only make use of the ISA bus.
For the Hammerfall DSP I/O-boxes Digiface, Multiface and RPM, RME have developed a world-exclusive PCMCIA type II card in Zero wait state CardBus Busmaster technology. With up to 130 MB/s transfer rate in both directions the same basic performance is provided on a notebook as a PCI card would offer on a desktop computer. Additionally the card offers highest compatibility by being 100% Plug & Play compatible under Windows and Mac OS, and being able to share interrupts. The card itself will only use one interrupt (IRQ) for all functions (audio/MIDI.)
The connection between CardBus card and I/O box is established using ordinary firewire cable (closed LAN to IEEE 1394.) The data transfer does not use Firewire protocol, but our own proprietary bus protocol. The supplied cable is 4.5 m (15 ft.) long, a cable length up to 10 m (33 ft.) has been successfully tested. The CardBus card does not provide power to the attached I/O-box. Therefore a hi-tech switching power supply is included.
*********************
en gros la rpm n'est PAS une carte firewire, elle a besoin soit d'une carte pci (sur le tours) soit une carte pcmcia sur le portables
ils disent d'ailleurs que la prise urtilisée (voire le cable) est FWire, mais PAS le protocole, qui lui est propiétaire
sur le pbook il faut que tu achetess la carte pcmcia
|
|
|
|
|
|
|
|
1 utilisateur(s) sur ce sujet (1 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :
|
|
