  |
 Rme-hdsp9632 - Exp Midi I/o ?? |
 mar. 4 mai 2004, 02:28
Message
#1
|
|
 Junior Member  Groupe : Members Messages : 110 Inscrit : 20 févr. 04 Lieu : ACT - AU Membre no 36,296  |
RME-HDSP9632 - EXP MIDI I/O ??
Does any one know if theres a expansion Card for more midi ins/outs. My problem is that i have a control surface(mackie-Control) and a keyboard (Yamaha-Motif) And this PCI Card Only Offers 1/1 out midi interface but i need 2 does any one have suggestions Has any one got any ideas so i can run both midi i/o into the card. Would a midi merger work ?? (Midisolutions) any one got one???? If any one can shine some light on this . thanks in advance. cheers |
 |
 
|
|
mar. 4 mai 2004, 07:05
Message
#2
|
|
|
Advanced Member Groupe : Members Messages : 300 Inscrit : 21 août 02 Membre no 7,031 |
You can use MIDI Thru port from the first device.
|
|
|
|
|
mar. 4 mai 2004, 07:45
Message
#3
|
|
|
Rookie Groupe : Members Messages : 33 Inscrit : 23 févr. 04 Lieu : Oxford - UK Membre no 36,665 |
I run an HDSP9652 which has 2 midi ins - but ... I run about 6 midi ins to it (Piano, slave keyboard, Novation, Sync from ADAT etc.)
On one channel I use a Phillip Rees midi Merge - this is fine. On the other I use a MAudio 8x8 and this works fine too and has the added advantage of multiple midi outs for my midi rack units. Cheers Martin -------------------- Dual 2GHz PowerPC G5 / 2 x 19" Formac Monitors / Hammerfall Digi 9652 / Mackie d8b / 2.5 gig RAM
iMac G5 1.8 17" / M-Audio 1814 Firewire / Tascam TM-D1000 / 2 gig RAM Lacie Firewire Drives Logic Pro 7 / NI Battery - Guitar Rig - B4 / GMedia MTron / Crystal / LinPlug RMIV / OSX 10.3.6 |
|
|
|
|
mer. 5 mai 2004, 04:33
Message
#4
|
|
|
Newbie Groupe : Members Messages : 23 Inscrit : 25 févr. 04 Lieu : Montclair - US Membre no 36,899 |
You need a midi patchbay. A simiple merger would get both outs into the computer. That might work fine. but you then need to get the out from it into both (split). A patchbay could set up both. Midiman USB has 8 ins and 8 outs with any routable to any, about $300. JLcooper used to make one that you can find on ebay for much less, well under $100 I'd think.
|
|
|
|
|
1 utilisateur(s) sur ce sujet (1 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :
