|
|
Recording Electric Guitar To An Ibook, Help Sought - PLEASE! |
|
|
|
dim. 20 juin 2004, 13:53
|
Newbie
Groupe : Members
Messages : 10
Inscrit : 12 juin 03
Lieu : London - UK
Membre no 19,588
|
Hi all,
my name's Matteo Prezioso, and I am a London-based independent filmmaker, as well as a macmusic member.
Apologies in advance for what might, will look as a way-too-basic question for you. I have been a guitar player for years. I know have decided to record a few tracks on my laptop to then give for further developing to my composer(s). I basically am trying to record my guitar 'straight' to my Mac (iBook). I've been given some advice on how to do that, and though I've got now the proper gear, I still cannot, so to speak, see the light. Apologies if my language is too down-to-earth, but I am just trying to expain exactly what I've been doing. I hope for some technical help.
I've got an iBook G3 800Htz 612 RAM (with Cubase SX Mac OS X 10.3 Panther), a Behringer UB802 as external mixer, and an iMic as USB stereo device. Funnily enough Cubase SX (not the version 2.0) seems to work fine, though I have never properly used. Yet again, it runs fine. What follows is that I have done so far.
A) I have connected the mixer to the iMic by using 'tape out' on the Behringer with a stereo L/R cable (I have not used the 'main out' because I don't have the proper jack size. Then, I have inserted the other end of the cable to the iMic INPUT. From there, I've connected the iMic to the iBook via USB. B) I've opened system preferences on my iBook (I've got MAC OS X Panther 10.3) Opened INPUT and selected 'iMic USB audo system'. Then opened OUTPUT and done the same (i.e. selected 'iMic USB audio system'). I've then opened again input, and checked that the sound does go through the Mac by seeing the leds going up and down on the system preferences' sound's 'input levels'. Which looks good to me for there is no led up, downs when selecting selecting 'internal - built in - michrophone'. So far so good. C) I've opened Cubase SX. And it's here - I believe - that I am getting something wrong. No matter what I try, everything seems dead. No colour leds moving up and downs, etc. I have never used Cubase, and so I don't really know what I am doing wrong. But I've been trying for quite some time, unsuccessfully. I just need to know if I have missed some important step here and there. Any idea?
Finally. I am always interested in collaborations for my films. If interested let me know and I'l llet you know more about upcoming projects, and the ones done already to which you can have a look on the web.
Regards,
Matteo Prezioso So What! Films - London Email: sowhatfilms[who happen to be at]aol.com
Ce message a été modifié par lepetitmartien - lun. 21 juin 2004, 03:22.
--------------------
Matteo Prezioso So What! Films - London
iBook 14" G3 800Htz 612RAM 30Gb, LaCie 320Gb, Cubase SX, Behringer UB802, iMic
|
|
|
|
|
lun. 21 juin 2004, 22:39
|
Newbie
Groupe : Members
Messages : 10
Inscrit : 12 juin 03
Lieu : London - UK
Membre no 19,588
|
Hi Lepetit,
point taken. Actually, double point taken. Shall I post a new msg (kinda update of the previous one) or keep the screwed one? Looks like you rightly took it off the posting board.
Cheer-y-ooh
mateito-ito
--------------------
Matteo Prezioso So What! Films - London
iBook 14" G3 800Htz 612RAM 30Gb, LaCie 320Gb, Cubase SX, Behringer UB802, iMic
|
|
|
|
|
mer. 23 juin 2004, 00:14
|
Newbie
Groupe : Members
Messages : 10
Inscrit : 12 juin 03
Lieu : London - UK
Membre no 19,588
|
Can I just add something?
Not sure if I get any feedback, but this is the situation.
If I go into 'Devices' - 'Device Setup' - 'VST Multitrack', on the ASIO driver field I find "Built-In Audio". I then try to switch to the proper one, i.e. "iMic USB Audio System". What I get is: "NO ASIO DRIVER ERROR".
The guitar is connected to the (Behringer) mixer through Channel 1. The mixer then goes straight to the iMic via L/R stereo cable from tape out l/r - in desperation I have also tried tape in l/r.
I really don't know what's wrong. I know it's not a straightforward process, but nothing would prepare me to this...not even FinalCutPro (that is an easy setup, believe me!
In desperation. Please Help.
--------------------
Matteo Prezioso So What! Films - London
iBook 14" G3 800Htz 612RAM 30Gb, LaCie 320Gb, Cubase SX, Behringer UB802, iMic
|
|
|
|
|
sam. 26 juin 2004, 16:48
|
Newbie
Groupe : Members
Messages : 3
Inscrit : 24 nov. 03
Lieu : DE
Membre no 29,571
|
It's exactly the same problem with me. I also tried to connect my guitar to cubase using iMic, but without success, seems that my version of cubase doesn't support USB audio or something. I already gave up triying. 'GGreetss Nickken
|
|
|
|
|
|
1 utilisateur(s) sur ce sujet (1 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :
|
|
|