Mac Music: Mac and Peripherals: Mac PowerPC: Ibook G3 Dillema: Firewire Interface W/firewire Hd

Recherche

Aide

Bienvenue invité : Se Connecter | Devenir Membre

440 Forums > English > Mac Music > Mac and Peripherals > Mac PowerPC

Ibook G3 Dillema: Firewire Interface W/firewire Hd, FW410, one FW port

Options

asfdzxxc Voir le profil	dim. 4 avril 2004, 03:55 Message #1
Newbie Groupe : Members Messages : 3 Inscrit : 09 mars 04 Lieu : Milw - US Membre n^o 38,054	M-audio says not to run a fw HD thru the same port it's connected to, so a FW hd is out of the question unless it does work in practice. Are there any other solutions?

e sparalesto Voir le profil	dim. 4 avril 2004, 11:44 Message #2
Senior Member Groupe : Members Messages : 226 Inscrit : 14 déc. 02 Lieu : Paris - FR Membre n^o 10,079	sell your FW410 ??

dixiechicken Voir le profil	lun. 5 avril 2004, 12:00 Message #3
Moderator Groupe : Team Messages : 370 Inscrit : 19 mars 03 Lieu : Umeå - SE Membre n^o 14,645	You can try to run it anyway to se what happens. According to MOTU there is not "per se" any such restrictions in their hardware. QUOTE Firewire Drives and MOTU 828/896 Assuming a FW drive has acceptable multimedia spec, there's no reason why you couldn't use it as a record and playback destination for digital audio. 7200 RPMS is the spec to look for in Firewire drives. Glyph makes high end audio drives, and we've also tested VST smart disk HDs.<br><br>The 896 provides a "passthru" for daisy chaining a firewire HD. If you have an 828 you can daisy chain it to the HD (if the HD has a passthu)... or you can use a powered firewire hub. NOTE: G4s with firewire 800 have problems using FW audio interfaces and FW hard drives at the same time. To run both on these machines you'd need to add a PCI firewire card wtih a TI or Luncet chip and run the MOTU audio interfaces off of that card and the hard drives off of the internal firewire ports (or vice versa). Above quote is from Motu:s techsupport docs. Cheers: Dixiechicken -------------------- ================== Oh my god it's full of stars… --------------------------------------------------- Mac-G5-2x.2.0, OS-X 10.5.1, 250/200Gb HD - 7.0Gb ram DP-5.13, Motu 828 MK-II, MTP AV Usb, ltst drvs, Kurzweil-2000, EPS-16, Proteus-2000, Yamaha 01V Emes Kobalt monitors ================================

e sparalesto Voir le profil	lun. 5 avril 2004, 23:15 Message #4
Senior Member Groupe : Members Messages : 226 Inscrit : 14 déc. 02 Lieu : Paris - FR Membre n^o 10,079	and as told in FW410 install manual : install the driver reboot after reboot plug your FW device if you own a G4 previous Quicksilver, YOU SHOULD NEVER DO THAT ! because they don't have a phy protection pluging a FW410 while your computer is running can kill your firewire ports for good and indeed it's what it did with mine !

	mar. 6 avril 2004, 08:24 Message #5
Groupe : Messages : 0 Inscrit : -- Membre n^o 0	I am confused by your post. I own a Quicksilver and want to know about anything that could fry my firewire ports 4 sure! i'm unclear as to exactly what you did to make this happen. Could you explain a little more. Thnx

e sparalesto Voir le profil	mar. 6 avril 2004, 10:32 Message #6
Senior Member Groupe : Members Messages : 226 Inscrit : 14 déc. 02 Lieu : Paris - FR Membre n^o 10,079	i just followed the installation instructions... m-audio tell to plug you card as your computer is running which is risky because G4 models previous to the Quicksilver (included ?) don't have a protected phy and chances are that the fw ports will either been deactivate or killed by such manners. fact is that when they release their products they rely on current Apple computers specifications and didn't read the old gears ones, well old, i'm not talking G3 here... 1-m-audio do not follow Apple specifications 2-there are no warning about that anywhere in the documentation 3-when your fw ports are killed they leave you in the dust

« Sujets plus anciens · Mac PowerPC · Sujets plus récents »

1 utilisateur(s) sur ce sujet (1 invité(s) et 0 utilisateur(s) anonyme(s))

0 membre(s) :

Modes d'affichage: Standard · Passer au mode : Linéaire+ · Passer au mode : Arborescent

Suivre ce sujet · Envoyer ce sujet · Imprimer ce sujet · S'abonner à ce forum

Version bas débit - mercredi 25 déc. 2024, 23:57