Perte De Son Dans Pro Tools, ou sont passes tous mes dB??? |
jeu. 24 nov. 2005, 15:37
Message
#1
|
|
Rookie Groupe : Members Messages : 33 Inscrit : 03 nov. 03 Lieu : Vitry - FR Membre no 28,121 |
Hello. For my first post i'm asking for help:
My system: Mix + (1Core/1Farm) 1. 888-24 io (on the core) 1. Adat Bridge (not the 24) on the farm connected with the Y 2 Adats connected with lightpipe to the adat bridge. Pro tools TDM 6.4.1 Mac os X.3.9 G4 QS 933 1Go Ram Now the issues: I am working on a 50 tracks Mix. 24 outs to the mixers. I have both Stereo and Mono Tracks. Randomly, i have a loss of signal on some outpouts. about 14db for example: i have 4 tracks of kick routed to the 1 output (888) and 4 tracks of snare to outpout 2. Everything was fine i was almost hitting red on the 888 vu meters for out 1&2. Now it stalls below the yellow. And i didn't change anything. and, when i create a master fader for out 1&2 it shows the same than on the 888 whereas the vu of the tracks are hitting red. Worse: new session, only one track. No audio just a signal generator set to 0db (tracks hits the red) on the 888: not even yellow. If i check the master out for 1&2: ok with the 888 Leds: not even yellow. And the best: if i route the track in a aux and route the aux to the out 1&2 i loose again for almost 8dB on both the master bus and the 888 vu :confused: now what i tried: Change the interfaces: i put the adat bridge ont the core and the 888. I have the same trouble but now on the adat #1 (correspond to the out A1 & A2 in the soft) So i guess the interfaces are not involved neither the digicables. It can only come from the mix core (but i doubt) or The soft itsfelf. oh i also try to do it with no plugs... same result it was even worse yesterday since several outputs had the same issues. When i came back this morning all worked ok util now. I wonder if it can be a problem using mono out and stereo outs at the same time... i restarted everything thousands time. i don't know. Thanks for your help |
|
|
jeu. 24 nov. 2005, 16:12
Message
#2
|
|
SuperHero Groupe : Members Messages : 1,519 Inscrit : 02 févr. 03 Lieu : Hardricourt - FR Membre no 11,332 |
Hi,
You posted on the french side of macmusic... For your problem, I may have a solution: Do you use +12db gain on the faders? I noticed that the MIX Hardware can't manage sessions with +12db. It was design to manage +6db, and generally with +12db it results in a strange management of the levels, just as you described. Hope this helps, scuse me for my poor english! PS: je viens de voir que le titre du sujet est en français... Donc, je disais que les cartes MIX zonent total sur les sessions avec les faders à +12. Essaye de faire des sessions à +6, peut-être est-ce la solution de ton problème. Ce message a été modifié par gyom - jeu. 24 nov. 2005, 16:15. -------------------- |
|
|
1 utilisateur(s) sur ce sujet (1 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :