Hi there I could really do with some advice my set up is

Microkorg
MIDI Sport 1x1
G4 Powerbook
Pro Tools MBOx

I can use the microkorg to trigger synths within pro tools but i really want to output midi from the software to the korg i've tried setting this up a few times with no luck

cheers Paul

by the way I have the ohmforce plugins bundle for sale if anyone is interested

If there are midi-drivers to the midisport and if the Mbox have any device-files,
install them. ( check the manuals and resp websites )

Connect the usb-cable from Midisport to the usb-connector on your Mac.
Start your mac.
Open the Audio/Midi control panel.
(located in Programs/Utilities folder on your harddrive)
Your Midisport interface should be visible (klick on the midi-tab)
Klick "Add unit" == "Lägg till enhet" in swedish - Look for the plus-sign.
Doubleclick the new piece of equipment icon.
Choose manufacturer and model from the drop down lists.
Connect the out and in arrows respectively between the icon symbolizing
the Midisport interface and the icon symbolizing the Microkorg.
(the newly added piece of equipment-icon)
Close and save settings.
( your midi settings in your os should mimic your real world setup)

Connect midi-cables from Midisport Midi-out to MicroKorg Midi-in.
and from Midisport Midi-in to MicroKorg midi-out
Open your software and configure midi according to instructions in the
manual.
Check manual to your MicroKorg for any midi caveats there and you should be set to go.
Of course you must have some recorded midi-info somewhere in your software
or midi-files/sequences on your computer,
to be able to trigger sounds on your synth.

Cheers: Dixiechicken

You should be able to do the same setup procedure for your MBox as well.
It does have one midi-in/midi-out - no???

Cheers: Dixiechicken

no thats the problem with the Mbox no midi in and out

OK - I stand corrected.
Try my checklist for the Midisport then.

Good luck - Dixiechicken