Version imprimable du sujet

Écrit par : liquidh2o dim. 8 déc. 2002, 00:29

I bought a yamaha DGX-500 recently, as well as an emagic mt4 to handle the midi in/out to my mac. Setup was a breeze, and I have reason 2.0 setup right now to where i can actually hear the notes i'm playing on my keyboard through reason.

Problem is, when I go to record a track, and i'm playing notes through the keyboard, reason isn't recording what i play. I've tried going thru the different synthesizers and the same results.

I followed the instructions on the FAQ for Reason for setting up my keyboard to record, and still no luck.

My setup is as follows.

Dual Ghz Mirror Drive power mac
running os 10.2.2
Reason 2.01 (the .01 is the latest update i believe)
Emagic mt4
Yamaha DGX-500

also of note I only have the yamaha DGX-500 setup with only midi out to the mt4, but I believe that's all i should need since i'm not wanting to hear what i play thru the sequencers(in reason) on the keyboard, is this right or am i missing something?

Your help would be greatly appreciated, as all i can do right now is just listen to the pretty sounds my keyboard makes while routed thru the synths and sequencers, talk about frustrating!

Thanks.

Écrit par : Levon River dim. 8 déc. 2002, 08:03

1) Is the MIDI icon showing in the track you're trying to record into?

2) Is your synth set to send on the *same channel* that is selected in the Reason Preferences "MIDI" panel for Reason to receive on?

3) Is the switch on the Reason transport set to "Overdub" or "Replace"?

If all the above is set correctly and the way you want it, click the red button on the transport and make sure it lights up. That means it's record-enabled. Then click the "Play" arrow on the transport, and you ought to experience recording joy. If not, holler.

Écrit par : liquidh2o dim. 8 déc. 2002, 09:44

1.) Yeppers

2.) hehhe

3.) I've tried both

back to #2, I had originally had it setup to port 2 channel 2, and i thought since that setting was able to get me sound via the advanced midi>Bus A, that using that same port/channel for the sequencer would yield the same results.

Not so.

Switching to port 2 channel 1 solved the problem and now i can continue on my merry way to hopefully making my first piece of music


thanks.

Écrit par : Levon River dim. 8 déc. 2002, 15:37

That channel thang will getya every time.

I've sometimes pondered on what peculiar kind of logic is required to write computer programs: that someone would invest endless chunks of their life in coding and meticulously designing all manner of bells, whistles, lights, guages, buttons, menus, windows--you name it--only to completely omit ANY visible indication of such a fundamentally crucial part of the operation.

Every time I get close to understanding what kind of mind that takes, it scares me.

Glad you're up and running.

Écrit par : E rouge mar. 10 déc. 2002, 06:32

I have the same set up... I dont understand, what did you change to fix it?

Écrit par : BusError mar. 10 déc. 2002, 13:00

Welcome to my world!

I can that the "bearded syndrom". Computer programmers for the most part have an deficiency in the "Take a step back and look at the whole thing"
In other words, if they were scultors, you would have a huge block of marble, uncut, with a couple tiny highly detailed gismoz sculted in; probably at places you wouldn't be able to look at, too.

Écrit par : Levon River mar. 10 déc. 2002, 18:49

In the Reason "MIDI" preferences pane, there's a drop-down for selecting the MIDI channel that the Reason sequencer is to receive MIDI on (it defaults to MIDI channel 1). It has to be set to the same MIDI channel that yer keyboard (or other MIDI controller) is set to *send* MIDI on. Otherwise, it's like dialing the wrong number.

Most all MIDI controllers have an option for setting the "Send" channel for MIDI information. (Some older ones--like the DX-7, IIRC--might be locked into sending only on MIDI channel 1.) Anyway, as long as:

1) Reason's preferences is set to receive on whatever channel your controller is sending on, and,

2) you've clicked in the far left of the track you want to record into (to put the MIDI icon in that track so you know that *that's* where your MIDI information is going), and,

3) you have a Reason sound module in the rack AND selected in the little drop-down "Out" menu on that specific track, then...

Everything oughta' be copesthetic.

Écrit par : Levon River mar. 10 déc. 2002, 18:55

Great analogy, buserror! Maybe that's why so many coders wind up with program managers leaning on the cubicle wall looking over their shoulders.

Seriously, though, we'd all still be using an abacus if it wasn't for all youse guys. A tip o' the Levon hat to you for all the gain--AND all the pain.